MS101-RD – How do I use the Synth Tool?

The latest version of the Synth Tool app can be found on the link below:|en)

This application can be used for many of our synthesizers, including the Model D, VC340 and the Odyssey. Once your synth is connected to your computer, it should be recognised automatically by the app. Press GET STARTED to open the settings for your synth.


Here you can set the incoming and Outgoing MIDI channel using the drop-down menu. You can also transpose any incoming MIDI note data and adjust the note velocity settings, as well as altering the pitch bend range of any incoming controllers/.

The sequencer tab allows you to input a sequence ready for import to your unit. Firstly, use the Bank and Pattern drop down menu’s to select the store location on your synth. You can select the number of beats for your sequence (between 1 and 32) and then use your mouse to draw in your desired sequence. When you have finished drawing in the sequence, press store to send to your synth. You can also export it to your computer, and import any saved sequences.

This tab allows you to see what firmware your unit is running. If you are running the latest software, it will say UP TO DATE. Otherwise, you will be given the option here to update via the app. Be careful not to close the application or unplug the USB cable during the update as this may damage your unit.


Share this page