M Air- How To Password Protect My Mixer?

When using your M Air mixer in Access Point mode you may wish to password protect the built in router so that other devices cannot connect without your permission. To set a password follow the steps below or see the video at the end of the page.

1) Whilst connected to your M Air go in to the SETUP menu.

2) Select the AP tab.

3) Then select WEP.

User-added image

4) In the SSID field you name your network.

5) In the Key field you can enter your password- this needs to be 5 or 13 characters.

6) Click APPLY.

6) Power cycle the mixer. 

7) You will now have to enter the password to access the network. The same will apply to any other devices trying to connect. 


Share this page