PROX - The Updater does not recognise my IO Box

The Updater will only see the IO box if it is configured correctly and green in the diagnostics.
If this is the case, try re powering everything and running the Updater again.  If this still doesn't
work, unplug the AES50 cables from the IO box, and connect the ethernet control port to the
ethernet control port on the rear of the PROX.  Repower everything and run the Updater again.
The IO Box should now be discovered.  The only downside to this method, is if you have more 
than one IO box that is not being discovered, then you will have to follow the same procedure 
over again as only one IO box can be upgraded at a time using the ethernet control port.

Share this page