DITTO X2 - How to update firmware in boot mode?

In order to update the firmware on your TC Electronic pedal correctly you will need to power your pedal on in Boot Mode.
System Requirements:
PC: Windows XP with Service Pack 2, Windows Vista, Windows 7, Windows 8 or later.
Mac: OSX 10.6x or later
  1. Download the latest version of the Ditto X2 Firmware
  2. Connect your pedal to your computer via USB, but don’t connect the power supply.
  3. Hold down the far left footswitch while inserting the power supply. KEEP THE SWITCH PRESSED DOWN UNTIL THE LOOP LIGHT TURN SOLID GREEN.
  4. Open the firmware update application and in the drop-down menu select DITTO BOOT.
  5. Click the UPDATE button.
  6. Once the update has reached 100% and the LEDs have changed.
You can now disconnect your pedal.

Share this page